Chalco aluminum purchased 2400mm air-cushion continuous heat treatment line and continuous surface treatment line for automobile plate with international advanced level as well as special-shaped shearing unit, laser cutting machine and roller roughing device....
Chalco aluminum purchased 2400mm air-cushion continuous heat treatment line and continuous surface treatment line for automobile plate with international advanced level as well as special-shaped shearing unit, laser cutting machine and roller roughing device. With those advanced equipment, the project is capable of continuous heat treatment and surface treatment of aluminum plates, realizing the functions such as cleaning, solution and quench, pre-aging, trimming, levelling, passivation and oiling etc.
Chalco aluminum can provide covering 6016 6014 aluminum coil strip plates with excellent punching performance, flange performance and good surface quality, used for doors, hoods, trunk lids and fenders.
Alloy: 6016 6014
Temper: T4/T4P
Thickness: 0.5--1.5mm
Width: 1200--2600mm
|
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Standard |
|
6016 |
1.0-1.5 |
0.50 |
0.20 |
0.20 |
0.25-0.6 |
0.10 |
0.20 |
0.15 |
EN/GB |
|
6014 |
0.3-0.6 |
0.35 |
0.25 |
0.05-0.20 |
0.40-0.80 |
0.20 |
0.10 |
0.10 |
|
Alloy |
Temper |
Tensile Strength(MPa) |
Yield Strength(MPa) |
Elongation A80 % |
Uniform Elongation Ag% |
Plastic Strain Ratio |
Strain Hardening Exponent |
Yield Tensile ratio Rp/Rm |
|
6016 |
T4/T4P |
205-240 |
85-130 |
≧24 |
≧20 |
≧0.6 |
≧0.26 |
≦0.55 |
|
6014 |
T4/T4P |
195-260 |
95-135 |
≧23 |
≧19 |
≧0.6 |
≧0.24 |
≦0.55 |
6016 6014 aluminum coil strip is applied to the automotive hood, automotive roof and automotive door, truck lid and fender.
|
2600mm super width coil |
|
|
|
Aluminum strip |
  |
|
Color coated aluminum coil strip |
 |
|
Aluminum checkered coil strip |
 |
|
Aluminum stucco coil strip |
 |
|
Aluminum coil-Eye to wall packing |
 |
|
Aluminum coil-Eye to sky packing |
 |
